Symmetry Video Management is designed to support leading brands and models of Network IP Cameras and Encoders.

This page shows the current models specifically supported in Symmetry Video Management v6.2 SP1.

Similar models from the same manufacturer may work but have not been tested.  The reseller should thoroughly test the required functionality prior to committing to use of any model that is not listed.

Cameras and Encoders are supported through Service Packs and new model support may be added from time to time. New models may also be added to support specific projects or system integrators – please refer to your sales contact.

Symmetry also supports integration with DVR and NVR from 8 leading manufacturers. Further information is available from your sales contact.

AXIS:
Symmetry is designed to support basic video and control functionality for all Axis MPEG-4 and H.264 cameras, but has only been tested with the following models: 

207W, 207MW, 210, 210A, 211, 211A, 211M, 212PTZ, 213PTZ, 214PTZ, 221, 225FD, 232D, 233D, 241S, 241Q, 243SA, 291, 243Q blade, M1011, M1011W, M1031W, M3011, M7001 encoder, P1311, P3014, P3343, P3344, Q6032, Q1755

Arecont:
3105M, 1305M

Bosch:
NWC-455, NWC-495, NWD-455, NWD-495, Gen 4 Dome [Autodome Modular (VG4)]

Sony:
SNC-RX530P/B*, SNC-CS11, SNC-DF50P*, SNC-CS10, SNC-DF40N, SNC-DF70P, SNC-RZ-25P
(Note that a suffix of ‘P’ or ‘N’ in the Sony camera model name refers to the analog output signal in PAL or NTSC format, respectively)

Panasonic:
WV-NP244*, WV-NP1004, WV-NS202, WV-NF284, WV-NW484S*, WJ-NT304, MS954, NF302, NP304, NS954, NW964

*Note that support is for MPEG-4 streaming and not H.264.  Support for H.264 is planned for a future release.